Tactical index / Editorial strategy guide
Cover and flanking: improve hit chance
Use full cover, elevation, line of sight, and exposed angles before committing heavy fire.
01Verified game rule
Hit chance changes with distance, effective range, line of sight, cover, flanking, and elevation.
Use full cover, elevation, line of sight, and exposed angles before committing heavy fire.
Can every operator survive the enemy response and still reach the next objective?
02Decision signals
Editorial tactical model
03Tactical procedure
Use this procedure as a decision order, not a rigid script. Re-check it whenever a hit misses, reinforcements arrive, or the objective changes.
- 01Read distance and effective range before selecting the target.
- 02Trace line of sight and identify which cover edge blocks the shot.
- 03Use one operator to create a flank or elevation advantage before heavy fire.
- 04Re-check the displayed hit chance after every move; do not assume the angle worked.
04Field scenario
Against an entrenched enemy, move the first operator only far enough to reveal the cover edge. Use a second angle or elevation to improve the shot, then fire with the unit that remains safest after the attack.
05Common failure modes
Moving farther than needed for a flank and losing the return route.
Treating full cover as immunity while another enemy has a clear angle.
Committing damage before verifying the post-move hit chance.
06End-of-turn checklist
- 01Is every shooter inside effective range?
- 02Which enemies can see the destination tile?
- 03Did flank or elevation actually change the displayed chance?
- 04Can the flanking operator survive the counter-angle?
08Mission preparation worksheet
For a combat topic, map every recommendation to range, line of sight, cover, elevation, AP, and the enemy response. Damage is valuable only when it removes a blocker or shortens the route to the objective. Preview attacks, create the angle with the least movement, and keep the attacker protected after firing. Control effects, Overwatch, Advantage, and assists should support a named objective action rather than become automatic habits.
Start by converting the guide into a written mission intent: one required outcome, one acceptable loss limit, and one extraction condition. Then inspect the squad, equipment, injuries, Bonds, and available resources against that intent. A plan is incomplete if it names the preferred action but not the operator who performs it, the AP needed to complete it, and the square or facility state where that operator should finish.
Separate confirmed mechanics from your current assumptions. Confirmed rules can support the plan; assumptions must be tested with the smallest reversible action available. Reveal a lane before committing the whole squad, preview a shot before spending AP, and check the Holotable or The Den before paying Credits. This order protects the campaign from decisions based on an attractive reward, a favorite operator, or an unverified interaction.
Use one operator to create a flank or elevation advantage before heavy fire.
Moving farther than needed for a flank and losing the return route.
09Three-phase execution plan
Use full cover, elevation, line of sight, and exposed angles before committing heavy fire.
Opening phase: gather information without closing options. Identify the objective, enemy control lanes, safe end positions, and the action that must remain available. Move or interact with the operator who reveals the most useful information first. Avoid exhausting one operator while the rest of the squad is still waiting, because new line-of-sight, reinforcements, or objective changes can invalidate the original sequence.
Commitment phase: spend resources only after the route and target are verified. Compare the proposed action with a lower-cost alternative, then sequence support before damage and control before exposure. Use the displayed interface values rather than memory when range, hit chance, AP cost, treatment time, mission expiry, or reward thresholds matter. Preserve at least one response to a miss, a Downed operator, or a blocked route.
Closing phase: stop chasing marginal value once the objective or campaign purpose is secured. Recheck extraction, cover, remaining AP, injuries, Credits, Intel, and the next cycle before confirming the final action. A good close leaves the squad able to absorb one unfavorable result. If success depends on every uncertain roll working, return to the previous decision and reduce exposure instead of accepting a fragile finish.
10Decision gates and contingencies
Use a simple gate before every irreversible commitment: does this action advance the objective, reduce the largest immediate threat, or preserve a scarce campaign resource? If the answer is no, delay it. When two actions pass the gate, choose the one that reveals more information or keeps more follow-up options. This prevents low-value attacks, unnecessary purchases, and roster choices that feel active but do not improve the mission state.
Define the abort condition before acting. Examples include losing the safe extraction route, exposing the only Rally operator, reaching the Advantage cap without a planned spender, using the last recovery slot, or committing Credits needed for a critical treatment. When the condition occurs, change route, substitute an operator, use a cheaper action, or restart the tactical test. Continuing only because resources were already spent compounds the original error.
Use one operator to create a flank or elevation advantage before heavy fire.
Stop or change courseMoving farther than needed for a flank and losing the return route.
11Practice drill and review
Practice this topic on a low-pressure opportunity and change only one variable at a time. Record the initial state, the chosen action order, the displayed costs or probabilities, and the final position. On a retry, change the route, first operator, AP reserve, target priority, or purchase—but never all of them together. A controlled comparison teaches which decision created the result and produces a reusable rule for harder missions.
After the mission, review three moments: the first new information, the first irreversible commitment, and the point where extraction or recovery became certain. Note what was known at each moment and what was merely assumed. Keep the rule that consistently improved position or resource efficiency; discard a tactic that worked only because every roll succeeded. The goal is a repeatable process, not a highlight turn.
- 01Hit chance changes with distance, effective range, line of sight, cover, flanking, and elevation.
- 02Use one operator to create a flank or elevation advantage before heavy fire.
- 03Moving farther than needed for a flank and losing the return route.
- 04Confirmed rules are separated from editorial recommendations. No invented mission data or unverified drop tables are published.
12Field FAQ
Should I follow the sequence exactly?
No. Treat it as a decision order, not a scripted set of clicks. Preserve the objective, safety, and resource checks, then adapt the individual actions to terrain, enemy placement, operator availability, and campaign state. If new information changes the risk, pause and rebuild the remaining sequence instead of forcing the original plan.
How do I know the plan is improving?
Compare objective progress, exposed operators, AP left after the key action, scarce resources spent, and recovery required afterward. Improvement means achieving the same or better outcome with a safer final position and fewer forced costs. Damage alone is a weak measure when the mission can be won through interaction, control, survival, or extraction.
Primary sources
Confirmed rules are separated from editorial recommendations. No invented mission data or unverified drop tables are published.